PFAFF THREE HOLE YARN FOOT WITH IDT GRPS FGJ
Please note: No returns allowed on opened software and consumables. (Paper, Ink, Disks, CDs, etc.) Return of non-defective products will be subject to a 20% restocking fee on cost. Shipping charges are non-refundable.
Suddenly Sewing is not responsible for shipping costs of returned merchandise.
Embellish With Decorative Cords Or Yarn Embellish your project with different types of decorative cords or yarn, using 9 mm stitches. The Three Hole Yarn Foot guides the cords or yarn through the openings in the front of the foot and back through the groove under the foot.
How To Use:
1. Thread your machine with a regular sewing thread or decorative thread on top and regular sewing thread in the bobbin.
2. Select a 9 mm decorative stitch. Decorative stitches that use forward motion work best (Avoid stitches with too much backward motion.)
3. Thread the decorative cords or yarn into the holes from the top of the foot, using the Yarn Threader, prior to attaching the foot onto the sewing machine.
4. Make sure the cords or yarn slide easily through the openings. (If the yarn is too thick it will create too much tension and the feeding might be affected.)
5. Snap on the Three Hole Yarn Foot.
6. Engage IDT™ system.
7. Place the threaded cords or yarn under the presser foot with a 5 cm (2”) tail.
8. Place a tear away stabilizer underneath the fabric and place your fabric under the presser foot.
9. Sew carefully, not too fast. If your machine has a speed control reduce the sewing speed to easily guide the fabric and yarn as you sew.